I’m not sure of the floor plan or roof type. But what I do is run a cable up the corner and drill a tiny hole right in the corner through the ceiling. Then I use a PoE powered access point and leave it in the ceiling space centrally located. One tiny hole you can patch with just about anything when you move house. If you have a rj45 crimper then the hole can be the diameter of the cable.

I’ve also done something similar where I run Ethernet under the floor. I lift up the carpet slightly right in the corner and drill a hole through the floor and run the Ethernet under the house. You also then take it up into a closet etc.

If you’re more adventurous and confident with electrical work you can also TURN OFF MAINS, then open up a wall power socket, disconnect the wires, tie a pull wire and your Ethernet cable very securely, and go into the roof and pull the two through into the roof space. You then tie the end of the elec cable to your pull wire and pull it back down to the socket. You can then get a wall plate that is a power socket and Ethernet female combo and voila….

I’d still use LUKS. Even on USB keys.

I still wouldn’t use Veracrypt on a Linux disk. What about LUKS instead?

If you’re only using the external disk for days you could use ntfs with bitlocker and mount that in Linux. When your rest to fully migrate you could then do something Linux only if you wanted.

You should check out d2. It’s a code to diagram tool. You put some very simple coke and it draws your diagram. Quite quick and useful. Been using it for a while now.

I’ve always said this to people. I use Windows, Linux, and MacOS. I use whatever best suits what I’m doing and I like that idea. It may end up being 20/70/10, but so what. Why battle a shitty Linux app If you have a good MacOS app. Or maybe your liking that windows app for a certain task.

In reality this is really only something a dev or power user would really do though.

I had an issue where my docker networks started overlapping my network addresses and I had some issues to connect to the machine etc. so perhaps check to make sure your docker addresses don’t overlap your home network range somehow. Also keep the subnet mask in mind as the range might be bigger than what the first few numbers indicate.

I have no idea what types of files these are but it could turn out that you should rather use Git and push/pull from both sides which could works better.

Just a suggestion :)

Exactly. It’s documented in the config files!

Heh welcome!

If I was to give anyone advice it’d be to set up a way to make really solid notes/documentation. Be it a text/markdown file or a google doc. Put down the commands you run, put down the steps and then a link to where you found it. As you muck around and so on you’re going to remember that you wanted to get xyz going and you struggled and you can then refer back to those notes.

That has been the single most valuable thing I’ve learnt from this whole Linux endeavour I’ve been on.

When I reinstall I just follow my notes to get all the devices and so on going. Definitely worth the trouble!

Good luck and tell us how you go!

Ah nice! Tried Linux on the MBP? I just this week took the plunge with my 2016 MacBook 13,3. It was a MISSION to get everything working but I think later models have better support.

Which MacBook Pro do you have?

Thanks for the info. I wasn’t quite aware of the 13” and it’s resolution. That is quite comparable I agree.

I feel like these both lack really good high res displays. Why? It’s be awesome if it had something comparable to a MacBook Pro resolution.

I’ve recently started using proxmox -backup-client. Works well. Goes to my backup server along with my vm image backups. Works nicely with full deducing and such. Quite good savings if you are backing up multiple machines.

I the. Rsync this up to cloud once a day.

I have to say that I used to be a timeshift fan but I’ve started moving to snapper instead. Both are very similar but with snapper you can have multiple configs, one per sub vol. each with different settings. I like having a separate root and home schedules set up. Means I can restore one or the other independently. Works a treat.

Wow that looks very cool! Thanks for sharing!

more out of the box than what Arch comes with.

Rolling release model.

Here are mine. Sorry for the mouth full, but I think people may benefit from some of these :)

alias ll="ls -alkhF"
alias l="ls -1"

# BE CAREFUL WITH THIS AND COULD RETURN COLOR KEYCODES INTO PIPES ETC...
alias grep='grep --color=always' 

alias db='dotnet build'

alias gs='git status'
alias gf='git fetch'
alias gl='git pull'
alias gp='git push'
alias gpt='git push --tags'
alias gP='git push --force-with-lease'
alias ga='git add'
alias gd='git diff'
alias gw='git diff --word-diff'
setopt interactive_comments
preexec(){ _lc=$1; }
alias gcm='git commit -m "${_lc#gcm }" #'

# THE BELOW TO BE USED ALONG WITH THE FOLLOWING GIT ALIASES:
#[alias]
#	logo = log --pretty=tformat:'%C(auto,red)%m %C(auto,yellow)%h%C(auto,magenta) %G? %C(auto,blue)%>#(12,trunc)%ad %C(auto,green)%<(15,trunc)%aN%C(auto,reset)%s%C(auto,red) %gD %D' --date=short
#	adog = log --all --decorate --oneline --graph
#	dog = log --decorate --oneline --graph

alias glog='git logo'
alias gdog='git dog'
alias gadog='git adog'

alias gb='git branch'
alias gba='git branch --all'
alias gco='git checkout'
alias gm='git merge'
alias gt='git tag | sort -V | tail'

alias rl='source ~/.zshrc'
alias n='nvim'

# LIST PATHS OF OTHER ZSH SHELLS I HAVE OPEN
lssh() {
	ps au \
		| awk '$11 == "-zsh" || $11 == "/bin/zsh" { print $2 }' \
		| xargs pwdx \
		| awk '{ print $2 }' \
		| sed -n "\|^${2}.*|p" \
		| sort -u \
		| nl
}

# CD TO SHELL NUMBER RETURNED BY LSSH
cdsh() {
	cd $(lssh \
		| sed "$1!d" \
		| cut -f 2)
}

# CD TO PATH OF ANOTHER SHELL, USING FZF AS SELECTOR
cs() {
	cmd1=$(lssh | fzf --select-1 --query "$1" --height=~50 | cut -f 2)
	cmd="cd $cmd1"
	print -S $cmd
	eval $cmd
}

# RUN THE COMMAND FROM HISTORY, USING FZF AS SELECTOR, ALTERNATIVE TO <C-R>
hf() {
	cmd=$(history 0 | sort -nr | cut -c 8- | fzf -e --select-1 --no-sort --query "$1" )
	# push the command into the history
	print -S $cmd
	eval $cmd
}

# REMMINA USING THE CONNECTION FILE SELECTED USING FZF
rf() {
	pushd ~/.local/share/remmina
	cmd=$(remmina -c $(ls $PWD/* | fzf -e --select-1 --no-sort --query "$1"))
	# push the command into the history
	print -S $cmd
	eval $cmd
	popd
}